TUFFA's single skin steel heating oil tanks are manufactured from high-quality mild steel, built to last and designed to suit domestic installations. They are fully weatherproof and suitable for outdoor installations.

Features:

• Manufactured from 3mm steel plate, primed and painted
• 2” BSP fill connection c/w cap and chain
• Spark arrestor vent
• Channel runners 100mm x 50mm High
• 1” bottom outlet (10mm top outlet available upon request)
• Clock gauge
• Fittings pack (1” ‐ 1/2” adaptor, ball valve and filter)
• Central lifting eye
• Overfill preventer

Specification:

Options:

Outlet Options - This tank is supplied with a 1" BSP Bottom Outlet as Standard, a 10mm top outlet is available if required. 

Offload Options - This product can be delivered with a HIAB offload, alternatively, you can provide your own offloading facilities on-site. Offloading is to the side of the vehicle only.

Watchmansonic electronic remote contents gauge:

Features of the Watchmansonic remote gauge are:

Indicates tank volume in 10ths
Quick and easy to install (full installation instructions are provided)
The receiver fits into a 13amp plug socket in the house or garage
The transmitter is fitted with a long-life lithium battery
Suitable for all plastic tanks up to 3m in height
12 months manufacturer's replacement guarantee
Low power consumption
200m transmitter to receiver range
Option of audible buzzer setting when oil levels run low
Red light flashes when oil levels run low

Additional Information:

Single-skin oil tanks can be installed at a domestic property where a tank with secondary containment (or bunded tank) is not required.

Generally, a single-skin tank cannot legally be installed if the tank is:

in excess of 2500 litres
within 10m of controlled water (river, stream, ditch, soakaway, septic tank etc.)
located where a spillage could enter a loose-fitting manhole or open drain
within 50m of a well, borehole or spring
located over a hard surface where a spillage could enter controlled water
in a position where the vent pipe outlet is not visible from the fill point
within an Environment Agency source protection zone 1 (see www.environment-agency.gov.uk)
or in close proximity to any other environmental hazard
All commercial properties must have tanks with secondary containment if they store over 200 litres of oil (single-skin tanks can be used as long as they are inside a masonry bund which is impervious to oil and contains 110% of the primary tanks capacity).
If you are unsure as to whether you can legally install a single skin tank, please contact us before purchase on 0800 0568 350 so we can discuss the Oil Storage Regulations with you.

Or alternatively, please visit www.oftec.org for more information.

Tanks For Everything strongly recommends the use of a bunded oil tank as the safest and most secure method of storing oil. If in doubt please contact us or click here to view our range of steel-bunded heating oil tanks.

All oil tanks should be installed by a competent person in accordance with the OFTEC regulations, British Standards and LABC regulations.

Delivery:

FREE delivery of this product includes most UK mainland locations, however postcodes DD, DG, TD, PH, IV, KW, HS, AB, PA, KA, ML, EH, KY, FK and G as well as offshore locations will incur an additional delivery surcharge. Please contact us prior to ordering so we can quote the additional costs. This product is delivered to the kerbside. If you require any further assistance, please contact us with your requirements or call 0117 244 4099 so one of our sales team can help with your enquiry.