Description
Manufactured by Kingspan the Titan range of single skin heating oil tanks are UV stabilised and are available as either tank only or "Talking Titan" which includes a Watchmansonic remote contents gauge:
| Model: | LP1200GR |
| Capacity: | 1200 Litres / 260 Gallons |
| Length in mm: | 1785 |
| Width in mm: | 1350 |
| Height in mm: | 950 |
| Weight in kg when empty: | 52 |
| Outlet: | 1" BSP Female |
| Fill Point: | 2" BSP with cap & chain |
| Overfill prevention: | Yes - SpillStop |
| Inspection Access: | Yes |
| OFCERT: | 0642099509 |
| Manufacturer Warranty | 2 Years |
Options:
The Watchmansonic and Filter kit option "Talking Titan", provides an electronic remote tank contents gauge which fits into the spare socket on the tank and a combined lever valve with bowl filter, isolator, reducer, 10mm copper insert, jointing compound and even the PTFE tape - in fact all you need to connect the tank to a 10mm copper oil line!
Delivery:
FREE delivery of this product includes most UK locations, however postcodes DD, PH, IV, KW, HS, AB, PA, KA, ML, EH, KY, FK and G as well as offshore locations will incur an additional delivery surcharge. Please contact us prior to ordering so we can quote the additional costs. This product is delivered to the kerbside.
Additional Information:
Single skin oil tanks can be installed at a domestic property where a tank with secondary containment (or bunded tank) is not required.
Generally a single skin tank cannot legally be installed if the tank is:
- in excess of 2500 litres
- within 10m of controlled water (river, stream, ditch, soakaway, septic tank etc.)
- located where a spillage could enter a loose fitting manhole or open drain
- within 50m of a well, borehole or spring
- located over a hard surface where a spillage could enter controlled water
- in a position where the vent pipe outlet is not visable from the fill point
- within an Enviroment Agency source protection zone 1 (see www.environment-agency.gov.uk)
- or in close proximity to any other environmental hazard
- All commercial properties must have tanks with secondary containment if they store over 200 litres of oil (single skin tanks can be used as long as they are inside a masonry bund which is impervious to oil and contains 110% of the primary tanks capacity).
If you are unsure as to whether you can legally install a single skin tank, please contact us before purchase on 0800 0568 350 so we can discuss the Oil Storage Regulations with you.
Or alternatively, please visit www.oftec.org for more information.
Tanks For Everything strongly recommends the use of a bunded oil tank as the safest and most secure method of storing oil. If in doubt please contact us or click here to view our range of plastic bunded heating oil tanks.
All oil tanks should be installed by a competent person in accordance with the OFTEC regulations, British Standards and LABC regulations.


 - Hi Res-600x600.jpg)