Product Data
Description
Carbery Single Skin Oil Tanks are designed for installation within either a suitably bunded area or at those locations where a bunded tank is not currently required. Carbery Single Skin Oil Tanks are:
| Model: | 2500H |
| Capacity: | 2348 Litres / 516Gallons |
| Length in mm: | 2045 |
| Width in mm: | 1370 |
| Height in mm: | 1340 |
| Weight in kg when empty: | 90 |
| Tank Footprint in mm (length x width): | 1850 x 1050 |
| Bottom Outlet: | 1" BSP Female |
| Fill Point / Inspection Access: | Yes - 5" |
| OFCERT: | Yes |
| Manufacturer Warranty: | 5 Years |
| CE Marked: | Yes |
Gauge:
Apollo standard electronic remote monitoring contents gauge:
Features of the Apollo standard remote gauge are:
- Indicates tank volume in 10ths
- Quick and easy to install (full installation instructions are provided)
- Receiver fits into a 13amp plug socket in house or garage
- Transmitter is fitted with a long life lithium battery
- Suitable for all plastic tanks up to 3m in height
- 12 months manufacturer's replacement guarantee
- Low power consumption
- 200m transmitter to receiver range
- Option of audible buzzer setting when oil levels run low
- Red light flashes when oil levels run low
GEM Sight Gauge:
This option provides the traditional sight gauge, complete with isolation valve, integral filter and even a spare filter!
Delivery:
FREE delivery of this product includes most UK locations, however postcodes BT, DD, PH, IV, KW, HS, AB, PA, KA, ML, EH, KY, FK, G, DG, TD and TR as well as offshore locations will incur an additional delivery surcharge. Please contact us prior to ordering so we can quote the additional costs. This product is delivered to the kerbside.
Additional Information:
Single skin oil tanks can be installed at a domestic property where a tank with secondary containment (or bunded tank) is not required.
Generally a single skin tank cannot legally be installed if the tank is:
- in excess of 2500 litres
- within 10m of controlled water (river, stream, ditch, soakaway, septic tank etc.)
- located where a spillage could enter a loose fitting manhole or open drain
- within 50m of a well, borehole or spring
- located over a hard surface where a spillage could enter controlled water
- in a position where the vent pipe outlet is not visable from the fill point
- within an Enviroment Agency source protection zone 1 (see www.environment-agency.gov.uk)
- or in close proximity to any other environmental hazard
- installed in Wales
- All commercial properties must have tanks with secondary containment if they store over 200 litres of oil (single skin tanks can be used as long as they are inside a masonry bund which is impervious to oil and contains 110% of the primary tanks capacity).
If you are unsure as to whether you can legally install a single skin tank, please contact us before purchase on 0800 0568 350 so we can discuss the Oil Storage Regulations with you.
Or alternatively, please visit www.oftec.org for more information.
Tanks For Everything strongly recommends the use of a bunded oil tank as the safest and most secure method of storing oil. If in doubt please contact us or click here to view our range of plastic bunded heating oil tanks.
All oil tanks should be installed by a competent person in accordance with the OFTEC regulations, British Standards and LABC regulations.

 - Hi Res-600x600.jpg)

